Week 3 FYP 2 - Program Circuit

I use the Proteus 7 Professional to design the program circuit. I use PIC 16F877A as a programming this circuit. In the program circuit, I am using LCD as a display the circuit. Furthermore, I also use keypad for setting the time that want to be set for charger the battery. B3 as a output to control the charger circuit.

Week 2 FYP 2 - Circuit Diagram Charger

Form this circuit, bridge rectifier function as a converter supply voltage from A.C to D.C. IC 7805 as a voltage regulator IC to maintain the output voltage at a constant value and as a power supply for this circuit. The LM311 series is a monolithic, low input current voltage comparator and designed to operate from dual or single supply voltage. The device is also control test volt battery. Relay 12VDC use as a control the voltage circuit. When the battery was fully charge, the relay will cut off the circuit from normally close to normally open.

Week 1 FYP 2 - Research

For this week, I make research the circuit charger for my project. My circuit project must cut off automatic voltage when the battery was fully charge. I will use relay 12VDC for cut off the voltage because inside relay have normally open and normally close. When charge the battery, the relay will be in normally close and when the battery fully charger, it be turn to normally open.

 

Week 13 - Progress Report

Preparation to make draft progress report and chapter 1, 2, and 3for this project and must submit to my supervisor.

Criteria for progress report:

I.            Introduction/Purpose 

II.            Work completed during this time period. (dates)

III.            Works you need to complete before you finish the project.  

IV.            Problems encountered  

V.            Conclusions

The chapter 1, 2, and 3 should have the following format: 

Week 12 - Presentation for FYP 1

Week 11 - Preparation for presentation FYP 1

All the FYP1 students must make presentation on the week 12 to present their proposal project to the assessor. All the FYP1 must have 2 assessors and the assessor will assess the presentation from the FYP 1 student. Presentation shall be made in Microsoft office power point.

The presentation should have the following format:

1)      Introduction 

2)      Problem statement

3)      Literature Review 

4)      Methodology

5)      Objectives 

6)      Benefits/Contributions 

7)      Work Plan 

8)      Budget 

9)      Conclusion 

10)  References

 

Week 10 - Preparation for Presentation

Preparation for Presentation