Some review from my proposal
Introduction:
The
aim for this project is to make charging for car battery faster and efficient
for hybrid car or electric car.This charger is used alternating current (A.C)
230V as a power supply to turn on the charger. Then, a.c will be invert to
direct current (D.C) for charging car battery. This system is like fuel pump
station. For example, the customers needed to set time how long want to charge
battery car. After they set how long to charge car battery, they can go
wherever they want such as go to shopping, go to work etc. After the specified
time that there was setting, they came back and take their car.
Charging system has
to go through several phases to complete. The block diagram above show how this
system operates. A.C supply is used as input to identify the data given. Then we
used rectifier to convert a.c supply to d.c supply. After that, operation will be
function and the data will be read. When want charge the battery car, firstly
need to set the time to make how long want to charge. The charging
only occurs after time to charge was set. After the car battery was full, this
system will stop automatically.
Objectives:
Objectives:
The main objectives for this project are:
a)
To reduce time for charge the
battery.
b)
To upgrade conventional charger
car battery with new system.
c)
To increase the application of
hybrid cars or electric car
No comments:
Post a Comment